Power Battery Systems — Commercial Vehicle & Agricultural HEV/PHEV

Nine hybrid battery box platforms across three duty classes — commercial-vehicle PHEV, commercial-vehicle HEV and agricultural-machinery HEV — engineered for high-rate hybrid duty: max 30C discharge, up to 40,000 cycles, with an AI early-warning BMS and directional venting for thermal safety.

PHEV — Commercial Vehicle (Truck)

Box	Voltage / Energy	Power (cont./peak)	Cycles	Dimensions
TP box PLUS (dual-pack)	621.6V / 59.66kWh	180/180kW · 480/480kW @10S	≥7,000	1,060×600×240mm
P box (dual-pack)	576V / 62.2kWh	160/180kW · 360/480kW @10S	≥4,000	1,260×670×240mm

HEV — Commercial Vehicle (Truck)

Box	Voltage / Energy	Power (cont./peak)	Cycles	Dimensions
M box PLUS (dual-pack)	592.9V / 12.92kWh	120/120kW · 360/360kW @10S	≥40,000	916×630×230mm
T box	555V / 19.42kWh	75/75kW · 190/230kW @10S	≥7,000	1,091×585×246mm
L box	599.4V / 14.99kWh	60/75kW · 120/150kW @10S	≥6,000	1,060×600×240mm

HEV — Agricultural Machinery

Box	Duty class	Voltage / Energy	Power (cont./peak)	Cycles
Y box	220hp+ tractors	588.8V / 6.12kWh	60/60kW · 180/180kW @10S	≥40,000
Z box	140–220hp	599.4V / 10.49kWh	40/40kW · 100/120kW @10S	≥7,000
R box	50–140hp	370V / 6.48kWh	25/25kW · 65/75kW @10S	≥7,000
A box	≤50hp	353.3V / 1.84kWh	20/20kW · 60/60kW @10S	≥40,000
M box (harvester)	Harvesters	592.9V / 6.46kWh	60/60kW · 180/180kW @10S	≥40,000

Platform engineering: CAE/CFD-verified pack design with DV/PV test programs, multi-layer high-temperature protection, thermal-runaway early-cooling algorithms and directional pressure relief. Battery management runs BMU/BCMU stages tuned for high-rate hybrid duty.

FAQ

Which box fits my vehicle program?

Box selection maps to vehicle class and duty cycle — trucks start at TP/P (PHEV) or M/T/L (HEV); agricultural machinery maps by horsepower class from A to Y.

What cycle life can we expect?

From ≥4,000 cycles on PHEV packs to ≥40,000 cycles on high-rate HEV boxes — rated per the duty table above.

Can packs be customized?

Yes — standardized modular lightweight platforms with project-specific customization; CAE/CFD simulation and DV/PV validation are part of the program.